Assembly (continued)
5
Installing the drawer divider
□
Push the bottom drawer in the cabinet (A) to disengage the
spring locking mechanism. Fully extend the drawer.
□
Place the drawer dividers (G) into each compartment on the
left and right sides.
□
To close the drawer, push it in with both hands to engage
the spring locking mechanism.
6
Adjusting the leg levelers (optional)
CAUTION: Two people are needed to safely tilt the
cabinet and access the leg levelers.
□ If the oor is uneven, causing the cabinet (A) to wobble,
determine which leg (D) needs to be adjusted in height.
□
Carefully tilt the cabinet (A) either backwards or forwards to
access the leg (D) leveler.
□
Turn the leveler clockwise to make the leg (D) shorter, or
counterclockwise to make it longer.
□
Repeat as needed with the other legs (D) until the cabinet (A)
stands solidly on the oor.
G
A
A
D
6