Installation Guide; Important - ProSelect PSWFDSAS20 Manual Del Propietário

INSTALLATION GUIDE

IMPORTANT: Consult and follow all applicable state and local plumbing codes
1. Turn off all equipment to be fed.
2. Locate water supply shutoff valve and turn off.
3. Locate suitable location for installation.
4. Mount unit to wall with included mounting bracket.
(Ensure wall material is stable enough for
mounting purposes.)
5. Run a suitable line from the incoming cold
water line to the inlet left side of the Inline
Descaler system.
NOTE: Do not over tighten connection fittings. Do not use pipe dope. Do not use more than seven layers
of plumber's tape.
BASIC INSTALLATION WITH BYPASS LOOP
Bypass Loop
5
Step 4
Tankless
Water
Heater
Gas Supply
Cold In
Hot Out
NOTE: A bypass line is recommended
to be installed (not included).
PSWFDSAS20 Inline Descaler Owner's Manual