Troubleshooting - Scheppach DP60 Traducción Del Manual De Instrucciones Original

Improper handling of waste equipment may have neg-
ative consequences for the environment and human
health due to potentially hazardous substances that
are often contained in electrical and electronic equip-
ment. By properly disposing of this product, you are
also contributing to the effective use of natural resourc-
es. You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.

15. Troubleshooting

Fault
Device does not start
Heavy vibrations
Motor overheats easily
Motor makes excessive
noise
32 | GB
Possible cause
Motor, cable or plug defective,
building circuit breaker tripped
On/off switch (11/10) defective
Motor defective
Base plate (1) not fastened in place
Drill bit not clamped centrally
Overloading of the motor, insuffi-
cient cooling of the motor
Coils damaged, motor defective
www.scheppach.com
Remedy
Check power outlet, mains connection
cable, mains plug. Have repair carried out
by electrical specialist. Check building
circuit breakers.
Repair by customer service department
Repair by customer service department
Secure machine to a work bench or similar
Check drill bit in chuck (14)
Avoid overloading the motor while drilling,
remove dust from the motor in order to
ensure optimal cooling of the motor.
Have checked by customer service
department