Care And Cleaning - Klarstein 10032220 Manual Del Usuario

EN
24
4
After the installation of the water
tank, please ensure that no bubbles
are generated before pressing the
humidify button. You can adjust the
SPRAY VOLUME by pressing the SPRAY
VOLUME.

CARE AND CLEANING

Filter Replacement
The machine can remind you to replace the filters,after working for 1899 hours,
when pressing the power button ,the quality indicator light will shine to remind you of
replacing the filters. after replacing , pressing the power button until the fan runs,after
10 seconds, the total working time will be cleared into zero, Then turn on it again, it can
work normally.
Odor Sensing System Memory Reset
If the air quality indicator displays red color and the machine power is cut off suddenly,
you might have to reset the intelligent memory. Otherwise, the red color display will
remain.
1 Unplug the machine and wait for 15-20seconds.Plug again and start the machine
and press timer or Sterilize.
2 Keep the machine working for 15 seconds. Repeat the first step above twice.
3 Please perform the steps above extra in a clean environment without air pollution.
Otherwise the air quality display lights will be discrupted.
5
When the humidifier is not in use,
discharge the water from the water outlet
and keep the water tank empty.