Control Panel - Black Diamond BD100619 Manual Del Operador

cONTROLS AND fEATURES

control Panel

2
1
1. Choke – Used to start a cold engine.
2. Ignition Switch – Used to START or STOP the generator.
3. Intelligauge – Three mode digital meter for displaying total
run time, voltage and hertz.
4. Circuit Breakers (Flip Reset) – Protects the generator
against electrical overloads from receptacle A
5. Circuit Breakers (Push Reset) – Protects the generator
against electrical overloads from receptacles B.
3 4
A
120/240V AC, 30A Locking (NEMA L14-30R)
Y
May be used to supply electrical power for
A
operation of 120/240 Volt AC, 30 Amp, single
phase, 60 Hz electrical loads.
(4×) 120V AC, 20A GFCI (NEMA 5-20R)
C
May be used to supply electrical power for
B
operation of 120 Volt AC, 20 Amp, single phase,
60 Hz electrical loads.
13
5
B
RECEPTACLES