Zadro Health Soultions Nano-UV Manual Del Usuario página 4

How to use
1. Open the unit and battery cover. Insert 2 AAA
alkaline batteries.
(Note)
The Nano-UV™ Light Scanner comes
equipped with child safety locks. To open unit,
push the sliders
2. Hold the Nano-UV™ Light Scanner between ¼
and 1-½ inches from the surface you want
to scan.
3. Press the power button once and the light will
come on for 10 seconds.
4. For highly contaminated areas, hold the light
close to the object ( ¼" ) and repeat scanner 2
or 3 times.
5. For larger areas, place the light between ¼"
and 1 ½" and move the scanner slowly over
the area until the entire surface has
been covered.
6. The closer the scanner is to the object the
more effective it will disinfect.
7. Close the unit and the Nano-UV™ disinfection
light will turn off.