Safety Precautions - Panasonic TY-FB7SD Manual De Instrucciones

Safety Precautions

WARNING
•
Never attempt to disassemble or modify this product.
To avoid fire, shock, or failure.
•
If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the display.
Switch off the display and unplug the power cord plug from the supply outlet.
To avoid fire or shock, do not leave the power of the display turned on.
•
To avoid shock or other problems, do not leave the power cord plug plugged into the supply outlet.
•
Please contact our designated service department for installation or change of this Product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn power of the display off and unplug
the power cord plug from the supply outlet.
Handling Cautions
• Do not touch connector contacts with hands directly.
To avoid electrostatic damage to internal parts, before handling this product touch a large metallic object such
as a steel cabinet to discharge yourself.
• Be sure to use the supplied cable or specified parts for interconnection.
To avoid malfunction or failure, do not use parts other than those recommended.
Accessories
Check to make sure that the following accessories are included in the Terminal board package:
Terminal function label ( 1 sheet )
(Affix this label to the applicable slot of the rear panel
of the display.)
□ Slot cover
(To install this Terminal Board, remove an existing
dual size Terminal Board and fit it into the now
blank slot.)
6
All manuals and user guides at all-guides.com
( be sure to observe )
Terminal board replacement
Instructions
Screw × 4