Remote Control; Connecting To Bluetooth - iDance DISCO CUBE BC-20 Manual Del Usuario

REMOTE CONTROL

11 10
9
5
13
BC20
DISCO CUBE

Connecting to Bluetooth

1. Select the Bluetooth mode using the "mode" switch on the panel of the unit or from the remote control
itself in order to change the audio source. (all obstacles between the unit and the device connected must
be removed in order to ensure a proper connection)
2. Once you have selected the Bluetooth mode, the indicator light will flash and the speaker will emit a "beep"
sound.
3. Turn on the Bluetooth of your cell phone and then connect the phone to the unit. Search for BC-20 on the
phone and pair the device with the unit.
4. A password is not required to pair the phone with the BC-20
5. Once the unit and the phone have successfully been paired, the Bluetooth indicator light will flash and
music playback can begin.
6. Once the pairing process is completed, the next time the unit connects to the Bluetooth device, it will
connect automatically.
7. When listening to music via the Bluetooth function, the functions such as play, pause, next track, previous
track will be operative and can be changed through the panel on the unit, the remote control or directly
from your smartphone (Bluetooth device)
1
14
2
15
3
6
4
7
8
12
1. [STANDBY] Power key
2. [AUX] Choose AUX input signal
3. [VOL+]Increase music volume
4. [VOL-]Decrease music volume
5. [CH-/ ] Previous song
6. [CH+/ ] Next song
7. [0-9 Buttons] Choose song number directly
8. [EQ] Different Sound Effects
9. [U/SD]Choose USB/SD input signal
10. [MODE] Choose signal input
11. [MUTE] Mute key
12. [REP] Repeat song
13. [PLAY/PAUSE] Play/Pause key
14. [FOLDER] switch from one MP3 file to another
15. [ ] Switch to Bluetooth Mode
EN3