Aux Connection; Led Lights - iDance DISCO CUBE BC-20 Manual Del Usuario

USB/SD Function
1. Press the "MODE" button on the control panel of the unit or the remote control itself, to change the audio
source to the input "USB" or "SD" mode. You can also access directly by pressing "U/SD" from the remote
control.
2. Carefully insert the USB drive into the connector and / or the SD card into the slot.
3. The system will automatically start reading the MP3 files from the USB and / or from the SD card.
4. You can control play, pause, previous track or next track from the control panel of the unit or the remote
control.
5. To go to a specific track use the number keys on the remote control.
6. Press the "REP" key will give you the option of repeating "ONE"- one song or "ALL" – all songs played.
7. Press the "FOLDER" key, this will allow you to go from one folder to another.
8. Select "EQ" and select the various sound effects; "POP", "ROC", "JAZ", "CLA", "COU" and "NOR"
9. Press "MUTE" to silence the playback.
Note: USB storage media or SD cards that have been wrongly connected could cause serious damage to the unit.
An SD card, which is blocked, is not detected and will not be played by the unit.
USB or SD cards will be accepted will be of version 2.0 and up to 32GB

AUX connection

1. Select the input mode "AUX" using the "MODE" button on the control panel of the unit or the remote
controller itself, from which you can also press "AUX" for a shortcut.
2. Music playback will start automatically.
3. Press "PLAY / PAUSE" to stop playback or play.
4. Other functions are not operational and cannot be changed from the control panel of the unit or from the
remote control.

LED lights

• To activate it, position the switch "LED POWER" to ON. The LED on the top will begin to light up, randomly
changing colours or lighting up all at once.
EN4