Assembly - Husky HOUC3603B1QWK Guía De Uso Y Cuidado

Assembly

1
Installing the legs
Ensure all cabinet drawers are securely locked into
□
place using the lock (J) on the cart.
□ Lay the cart upside down. Use the packaging material
to protect the wood top from damage during assembly.
□
Mount the four legs (C) to the cart using six screws (AA)
per leg. Do not install four of the screws (AA) in the legs of the
tool cart on the side adjacent to the Husky badge.
The side handle (B) will be mounted here in a later step.
NOTE: The holes in the tool cart are tapped and do not
require nuts.
NOTE: Two people may be required to complete
this step.
AA
3
Securing the tray
NOTE: The holes in the tool cart are tapped and do not
require nuts.
□
Secure the tray (E) to the legs (C) using two screws (AA)
per leg.
□
□
C
□
E
AA
C
2
Attaching the tray
□
Clip the tray (E) to the four legs (C).
4
Installing the casters
CAUTION: Do not over tighten the bolts.
□
Mount the two swivel casters with brake (D) to the tray (E)
using four bolts (BB) per caster.
The s wivel casters with brake (D) should be installed on
the same side as the Husky badge.
□
Mount the two rigid casters (G) to the tray (E) using four
bolts (BB) per caster.
□
Tighten all bolts with a 13 mm wrench.
□
Carefully return the tool cart to its upright position.
BB
6
E
C
CC
D
E
G