Assembly Instructions - Pleasant Hearth OFR633PB Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Carefully pour one pack of the glass rocks in the fire bowl, per the examples below. Do not cover
the ignition screen with glass rocks. Wear protective gloves when handling glass rocks.
WARNING
DO NOT COVER THE IGNITION SCREEN when placing the glass rocks into the fire bowl. Always keep Ignition Screen visible. This
screen must be clear and free of obstructions at all times to insure proper operation.
Models
OFG418TA/OFG444T/OFG900T/OFG901T
OFG419T/OFG321S
Screen
Do not place glass
rocks on screen.
Keep screen clear.
Only 14.33 lbs/6.5 kg glass rocks are
approved for safe use with these fire pits.
CORRECT INCORRECT
CAUTION
Wear protective gloves when handling glass rocks.
1. Do not light or use gas unit if glass rocks are wet. Make sure glass rocks are completely dry before lighting as intense heat could
cause the rock to crack.
2. Glass rocks could hit a person's face or eyes during the initial startup of a gas appliance. Keep away from the appliance for the
first 20 minutes after lighting.
3. Do not add additional rocks to the fire bowl. Follow the instructions on the manual of the specific product.
4. Do not mix glass rocks with lava rocks.
5. Do not use two different sized glass rocks at the same time.
These glass rocks can be used with other gas fire pits. Before use, carefully check the instructions of
how to replace the glass rocks in the manual of the specific product; or contact your fire pit supplier or
GHP Group's customer service.
Models
OFG012T/OFG824T/OFG007TF/OFG125T
Screen
Do not place glass
rocks on screen.
Keep screen clear.
Only 7.72 lbs/3.5 kg glass rocks are
approved for safe use with these fire pits.
CORRECT INCORRECT
5
Models
OFG466TA/OFG467T
Screen
Do not place glass
rocks on screen.
Keep screen clear.
Only 7.28 lbs/3.3 kg glass rocks are
approved for safe use with these fire pits.
CORRECT
INCORRECT