Glacier bay FW6AC027CP Guía De Instalación Y Cuidado página 7

Installation (continued)
7
Installing the stopper and
horizontal rod
□
Before installation, unscrew the protective
cap (1) from the horizontal rod (R).
□
Insert the stopper (L) into the drain hole in
the sink.
□
Insert the horizontal rod (R) into the drain
body (P) and through the hole of the stopper
(L). See insert 1.
□
For easier removal and cleaning, rotate the
stopper (L) 90 degrees so that the horizontal
rod (R) does not go through the hole in the
stopper (L). See insert 2.
□
Make sure the joint (Q) on the horizontal rod
(R) inserts into the drain body (P) completely,
as shown (2). You can press the two sides of
the joint (Q) to remove the horizontal rod (R).
U
R
1
Insert 2
P
L
J P
Insert 1
R
Q
2
Q
8
Installing the lift rod
□
Insert the lift rod (U) through the faucet (J)
and attach the lift rod strap (S) to the lift rod
(U).
□
Slide the lift rod (U) down into the lift rod
strap (S) until it clicks into the lift rod strap
(S).
U
2
S
1
7
1
U
S
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
U
J