Key Description - METRICA 120zoom Manual Del Usuario

PARAMETERS AND OPERATIONS
There are a total of 7 parameters on 2 pages in the menu
KEY DESCRIPTION
Turn off
the backlight
Turn off
the laser
Switch off
the device
Adjust
sound
Units
Unit of angle
measurement
Calibration
ATTENTION
The calibration function may affect the accuracy of the unit, so
this option can not be set to the default state. The user must
follow the following calibration procedure:
Step 1: Turn off the device
Step 2: Press and hold
When the Welcome screen lights up, release the
30
OPTIONS
Slope
and press at the same time
button, and
when the main menu appears, release
Step 3: Short press , then press
ready for calibration (+/- 9 mm calibration range) by pressing the
and keys. Example: Place the instrument at a distance
of 1 m (determined) from the target and measure. If the result is
not 1000 (Example 1.004), select the CALIBRATION function and
make the required correction.
Set time (time set)
Press to access the Date /
Time menu.
Press or to choose betwe-
en the date and time.
Press or to set the date
and time.
Press to save the new values.
Press to return to the menu.
Brightness
Press to access the bright-
ness menu.
Press or to adjust the in-
tensity of the screen.
Press to return to the menu.
as well.
. The instrument is now
Data
Ora