Assembly; Before Starting - Wilks USA TX850 Manual De Instrucciones

TX850

Assembly

Locate the axle holes on the
underside of the frame. Insert
the axle so the sprung clip locks
in place

Before starting

Note: the washer will automatically shut down if insufficient oil is detected.
Add fuel:
01. Open the filler cap
02. Fill with unleaded petrol
up to the filter
03. Replace filler cap
Slide the wheel over the axle
and secure with the nut.
Add oil:
01. Locate the filler bungs on either side of the engine
02. Place washer on a level surface
03. Open the oil filler bung
04. Fill with 10W-40 semi-synthetic oil up to the threads
05. Replace oil filler bung
© Wilks-USA
English
Attach the gun hook to the
frame. Slide the threaded prongs
through the holes and secure
with two nuts.
5