Dynex DX-DTCAM Guia Del Usuario página 11

Using the Web camera
Camera control mode
In Camera Control mode you can personalize your camera settings for different
circumstances.
Settings tab
Setting
1
2
3
4
5
6
7
1
2
3
4
Image Mirror—Flip the image horizontally.
Image Flip—Flip the image vertically.
Low Light—Select to get a clear image in low light situations.
Adjust the picture elements to your personal preferences.
Adjust the resolution from 640 × 480 to 1280 × 960.
Adjust the white balance in the image. Click to remove the check in Auto to adjust.
Click Reset to return to the manufacturer's settings.
Click Restore to return to the previous settings.
Click Save to save the values you set up.
Outdoor/Indoor—Set based on where your Web camera is located.
Flicker—Select the correct frequency according to the country where you are
using the Web camera. (Before doing this, you need to select Indoor.)
Backlight Comp.—If your Web camera is located in a backlight position, select
this to get a sharper image.
B/W Mode—Select to get a black-and-white photo effect.
5
6
7
Function
11