Using The Double Zone Function - MiLECTRIC ECM-3F Manual De Usuario

Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.

3.3.3 Using the Double zone function

• The function only work in 3# cooking zone
• The Double cooking zone has two cooking areas that you can use a central section and an outer section.
You can use the central section (A) independently or both sections (B)
Adjust the heating setting between power levels 1 and 9 (e.g. 6).
Central section of the Double cooking zone will switch on.
Touching the Double zone control "◎" once time, the section (B)
works.
The cooking zone indicator show "
Touching dual zone control "◎" again, the dual zone function is
deactivated.
The cooking zone indicator show "6".
Activate the Double zone
" and " " alternately.
Deactivate the Double zone
11