Mestra 100276 Manual De Instrucciones página 7

PRECAUTIONS
▪ Before connecting the unit to the mains, check
that the power supply is 230 V, 50/60 Hz.
▪ Discard any cracked or damaged brush or
grinding wheel: if these elements break during
operation, they could cause serious accidents.
▪ Before starting work, ensure that the brush-
holder/wheel holder is firmly attached to the
motor shaft.
▪ When handling workpieces, use safety goggles,
gauntlets, a face mask and a suitable safety
screen. We recommend MESTRA Ref. 080200 /
080210 screens.
▪ Do not allow children or unskilled personnel to
handle the unit.
▪ If the motor shaft locks during normal operation,
disconnect the unit from the mains before
attempting to release it by turning it manually.
▪ Never polish, brush or grind materials which
may give off particles which are toxic if inhaled.
▪ Before starting to polish or grind a workpiece,
check the motor spin direction: the attack angle
depends on this direction.
▪ Never use the unit close to solvents, alcohol or
other inflammable materials. Take all possible
precautions when grinding materials which may
give off sparks.
▪ Never use the unit without proper exhausters.
▪ Keep the working area clean and tidy in order to
prevent accidents.
▪ Wear proper working cloth. Loose cloth, hanging
or long hair could be caught by the machine.
▪ Make sure that you switch the power Off before
plugging the unit, in order to avoid sudden start
of the motor.
▪ Disconnect the unit from power supply before
changing the wheel.
TECHNICAL CHARACTECTERISTICS
Power supply:
Power:
Speed:
Height:
Height of shaft centre line:
Width with brush holders:
Weight:
230 V, 50/60 Hz
1300 W
3000-7000 rpm
16,5 cm
12 cm
36 cm
6 kg
English