Sony ALTUS ALT-SA32PC Guía De Instalación Rápida

Quick Setup Guide
ALT-SA32PC
©2009 Sony Corporation
Check the package contents
Wireless Audio Transmitter for PC Wireless Speakers
(AIR-PC10T) (1) (AIR-SA50R) (2)
Cradle (1)
Wireless transceivers (2)
Remotes (2) R03 (size AAA) batteries (4)
Other contents
 Application software S-AIR Cast™ (CD-ROM) (1)
 Operating Instructions (3)
 Warranty (1)
1
4-147-129-11(1)
Hook up the Wireless
Speakers
1. Insert a wireless transceiver into the
back of each Wireless Speaker.
 mark
facing up
Insert securely until you hear a click.
2. Set the S-AIR ID on the back of both
Wireless Speakers to "A."
The S-AIR ID on each unit is set to "A" at the
factory.
3. Plug in the AC power supply cords (),
and turn each of the Wireless Speakers
Printed in China
on by pressing  /  ().
 to a wall socket
2
Connect the Wireless Audio
Transmitter
1. Turn on your computer.
2. Quit all applications, then connect the
Wireless Audio Transmitter to your
computer.
If the message to restart the computer appears,
restart the computer.
Once the S-AIR connection is established, the
S-AIR indicator on the Wireless Audio Transmitter
and the Wireless Speakers light up in green.
3
Insert the wireless transceiver
by pushing firmly until you
cannot see it from the side.

Enjoy your music with S-AIR
Cast™
With the supplied S-AIR Cast™ application software, you
can control the media player on your computer using
the buttons on the S-AIR Wireless Speakers.
S-AIR Cast™ enables you to enjoy more advanced usage
such as Remote Mode or Advanced Remote Mode.
Remote Mode enables the S-AIR Wireless Speakers to
remotely control the supported media player, and
Advanced Remote Mode enables the S-AIR Wireless
Speakers to play music tracks without launching a media
player. This allows you to enjoy music without
interference from the Windows system or other
application sound alerts.
For more details, refer to the Operating Instructions of
AIR-PC10T.
 Microsoft, Windows and Windows Vista are trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other
countries.
 iTunes is a registered trademark of Apple Inc.
 All other trademarks and registered trademarks are of their respective
holders. In this manual, TM and  marks are not specified.
Start playback
Open your media player, press the play
button to start music playback and enjoy.
Now, you are ready to enjoy your computer's
music library wirelessly throughout your home.
If there is no sound from the Wireless Speakers,
check the following:
 Adjust the volume of your computer.
 M ake sure to set the sound playback device
property on your computer to [AIR-PC10T] as
shown below.
1 Quit all applications (iTunes, etc.).
2 Click in the following sequence:
Windows Vista (in Classic View): [Start] –
[Control Panel] – [Sound] – [Playback]
Windows XP (in Classic View): [Start] –
[Control Panel] – [Sound and Audio Devices] –
[Audio]