Attaching The Bubble Humidifier - Weinmann OXYWAY Click Manual De Instrucciones

3.3 Attaching the bubble humidifier

Union nut
Connector
1. Unscrew the container from the top of the bubble
humidifier.
2. Unscrew the union nut from the oxygen outlet and
remove the connector.
3. Screw the top part of the bubble humidifier by hand
onto the threaded connection of the OXYWAY Click.
4. Fill the container up to the mark with distilled water
(aqua dest.) and screw the container on again.
5. Push the tube of the breathing unit onto the outlet
connection stub of the bubble humidifier.
EN
Operation
11