Mounting - Kicker PowerBar Serie Manual Del Propietário

Mounting

The KPB-series mounts out-of-the-box to round
bars with the included 1.5", 1.75", and 2" diameter
Bar Clamps. Use the KPB Square Clamps - sold
separately - to mount your KPB to square bars.
Choose a structurally sound location to mount the
KPB. The KPB may be mounted below or above
bars, and the Mounting Base may be rotated ±30° to
accommodate some curved bars. Make sure there
are no items interfering with the route of the wiring.
Installation tools are not provided. 5mm and 6mm
Allen Wrenches are required.
1. Screw the Mounting Bases to the PowerBar using
the Mounting Screws.
6mm Allen Wrench required
±30°
English 6