NEO FRESNELED COLOR Manual De Usuario página 11

ACTIVATE THE PASSWORD
•
Enter the <KEY> mode to select whether the ac-
cess password is ON or OFF.
•
When the fixture is set as PASS <ON>, after 30
seconds or turn on the fixture next time, the fix-
ture will need access password to enter the dis-
play menu control.
NOTES
The factory access password is <UP> + <DOWN> + <UP>
+ <DOWN>, then press <ENTER> to confirm the access.
BALANCE PARAMETERS AND CORRECTION MENU DISPLAY
•
Press <MENU> button to enter the password
confirmation, to enter the correct password,
<UP> + <DOWN> + <UP> + <DOWN>. Key
press the <MENU> in, the correct password will
enter show submenu.
•
Enter the <CALIB.C> to select white color of dif-
ferent color temperature.
•
There are 8000k pre-programmed White colors
that can be edited by using <RED>, <GREEN>,
<BLUE>, <AMBER>, <LIME>.
•
Enter the <RGBtoW> to adjust the RGB parame-
ter to make different whites.
•
When the new setting is activated, the DMX con-
troller choose RGB=255, 255, 255 the white
color will be made by the actual RGB values on
the <RGBtoW>.
INFO
•
Press <ENTER> and go to <INFO> you can check
<VERSION>.
P. 11
FRESNELED COLOR
ENGLISH VERSION