AnteaMED oppla Manual Del Usuario página 33

To turn off this function, please send
15. No motion alarm
Command: V1, xx S/M/H
Note: No spaces in between, S means seconds, M means minutes, H means hours, xx means the time you set and must be two digitals.
Example: V1,05M
If device detect no motion more than 5 minutes and it will send an SMS warning alarm to all registered phone numbers.
To turn off this function, please send
16. Turn off 2 LEDs
Command: LED1
The device will reply "LED off" and later LEDs will stop flashing, but the device is on working.
To turn on LEDs, please send LED0
17. To set number for side button
Command: X1 / X2 / X3
Example: X1
Side button can be configured to call which number, if set X1 means it will call number A. default setting is X2, which means to call number B.
18. AGPS
Command: AGPS1, latitude, longitude
Example: AGPS1,22.647606,114.022583
L0 to the device.
V0
- 13 -
GPS tracking system
EN