Sends/Executes Control Operations:
Maximum number of CROB (obj. 12, var. 1) objects supported in a single message
1
Maximum number of Analog Output (obj. 41, any var.) supported in a single message
0
Pattern Control Block and Pattern Mask (obj. 12, var. 2 and 3 respectively)
supported.
CROB (obj 12) and Analog Output (obj 41) permitted together in a single message.
WRITE Binary Outputs
SELECT (3) / OPERATE (4)
DIRECT OPERATE (5)
DIRECT OPERATE - NO ACK (6)
Count > 1
Pulse On
Pulse Off
Latch On
Latch Off
Queue
Clear Queue
_______________________________________________________________________
Attach explanation:
All points support the same Function Codes: (3) Select, (4) Operate, (5) Direct
Operate and (6) Direct Operate - NO ACKNOWLEDGE.
All points support the same Control Codes: (1H) Pulse ON, (3H) Latch ON, (4H)
Latch OFF, (41H) Close-Pulse ON and (81H) Trip-Pulse ON.
Each of the permitted Control Codes performs the same operation in all points.
ON-time and OFF-time fields are ignored.
Maximum Select/Operate Delay Time: 60 seconds.
Atención
© ZIV Aplicaciones y Tecnología, S.A. Zamudio 2004
Este documento contiene información confidencial propiedad de ZIV S.A. Cualquier forma de reproducción o
divulgación está absolutamente prohibida y puede ser causa de severas medidas legales.
DNP 3.0 : Device Profile Document
Always Sometimes
Never
Never
Always Sometimes
Never
Always Sometimes
Never Always Sometimes
Always Sometimes Configurable
Never
Never
Always Sometimes Configurable
Always Sometimes Configurable
Never
Never
Always Sometimes Configurable
Never
Always Sometimes Configurable
Always Sometimes Configurable
Never
Always Sometimes Configurable
Never
18 of 28
Page
Configurable
Configurable
Configurable
Configurable