Steren MIX-160 Manual De Instrucciones página 24

6. SPECIFICATIONS
Mono input channels
Microphone input: Electronically balanced, discrete input configuration.
Frequency response: 10 Hz to 45 kHz, ± 3 dB
Distortion (THD&N): 0.005% to +4 dBu, 1 kHz
Gain range: 0 dB to 40 dB (mic)
SNR (Signal to Noise ratio): 110 dB
Line input: Electronically balanced
Frequency response: 10 Hz to 45 kHz, ± 3 dB
Distortion (THD&N): 0.005% to +4 dBu, 1 kHz
Sensitivity range: +10 dBu to –30 dBu
Stereo input channels
Input: Non-balanced
Frequency response: 10 Hz to 55 kHz, ± 3 dB
Distortion (THD&N): 0.005 % to +4 dBu, 1 kHz
Impedance
Microphone input: 3.6 kohm
Other inputs: 10 kohm or higher
RCA output: 1 kohm
Other outputs: 120 ohm
11 11