Ibx S50L Manual De Usuario página 4

• Do not connect the power cord to the middle section.
• Ensure that the main cable does not touch the surface.
• Do not damage the power cord and always use the specified one. In case of damage, the
power cord must be replaced.
• Do not unplug the power cord during operation.
• Unplug the cord before maintenance, after use, and if the instrument is running abnormally.
• Do not touch the power plug with wet hands.
• Wear gloves when repairing and maintaining the instrument.
Other necessary considerations:
• When touching the inner wall of the door, do it carefully, as it may be hot.
• The internal parameters must be set by the specific management person to prevent the function
of the controller program from being disturbed by an unknown setting.
• The equipment must be placed at least 20cm away from the wall and from any objects.
• Open and close the door gently to prevent damage to the equipment.
• Do not expose the equipment surface to volatile chemicals.
•
Keep the equipment clean, both the inside and the outside.
4