Operations; Quick Start - EAS ELECTRIC EMWY1075V Manual De Instrucciones

OPERATIONS

Quick Start

Caution!
• Before washing, please make sure it's installed properly.
• Before washing at first time, the washing machine shall be operated in one
round of the whole procedures without clothes in as follows.
Calibration
It's recommend to calibrate the wash machine so that can serve you better.
1- Empty the wash machine;
2- Plug in;
3- Power on the wash machine and press "Temp." and "Nivel de secado" at the
same time within 10 seconds then display "t19"(Washing and Dry)
4- Press to start the wash machine and wait till display "****"
1. Before Washing
1
Plug in
Note!
• Detergent need to be added in "case I "after selecting pre-washing for machines
with this function.
2. Washing
1
Power On Select Programme Select function or
2
Open tap
2
default
3
Load Close door
3
Start up
4 5
Main
wash
Softener
Prewash
Add detergent
4
V.3