Cleaning And Maintenance - lauson AHF103 Manual De Usuario

INSTALLATION
The appliance requires no installation; it should be used solely as a portable
appliance. Portable appliances are not suitable for use in a bathroom.
OPERATION
- Turn the thermostat knob (right) in a clockwise direction until it reaches the
maximum setting.
- Summer service (ventilation only): turn the knob to setting
Heating at reduced power: turn the knob (right) to setting I (1000W). –
-
- Heating at full power: turn the (right) to setting II (2000W).
- Switching off: turn the knob (left) to setting O.
REGULATING THE THERMOSTAT
When the room has reached the required temperature turn the right thermostat knob
(where included) in an anti-clockwise direction up to the point where the appliance
switches off and not beyond. The temperature fixed in this way will be automatically
regulated and kept at a constant level by the thermostat.

CLEANING AND MAINTENANCE

Before cleaning always remove the plug from the electrical socket. Clean the air
islet/outlet grilles frequently. Never use abrasive powders or solvents.
WARNINGS
- Do not use the appliance in the vicinity of showers, bath bibs, wash basins,
swimming pools, etc.
- Always use the heater in an upright position.
- Do not use the heater to dry your laundry. Never cbatruct the intake and outlet grilles
(danger of overheating).
- The heater must be positioned at least 50 cm from furniture or other objects.
- When the appliance is used in portable version. do not place it up against walls,
furniture, curtains, etc.
- The appliance must be installed so that the switches and other controls can not be
readied by persons using the bath tub or the shower.
- This appliance comes with a Y-type connection. Replacement of the feed cable must
be entrusted only a technician authorized by the manufacturer, because such work
requires special tools.
.