Infiniton CMPT-STL6T6 Manual Del Usuario página 16

Lower decorative chimney
 Fix the exhaust pipe on the hood body,
connect chimney and hood body with 2
screws 12. connect chimney fixing
bracket and chimney with 2 screws 12.
Hook the hood body
Hook the hood body to the bracket 20.

Level the hood body itself.

Remove the filter from the inside of the hood body, fix the screws 10 to Wall Plugs 11 at

the points (3).
Right
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer

flange 3 on the hood body outlet.
Fix the pipe 4 in position using sufficient pipe clamps (not supplied).

Remove possible charcoal filters.

Upper Decorative Chimney
Insert the upper decorative chimney 2.2 into the lower decorative chimney 2.1 and drag it up to

the horizontal line B
Connect upper decorative chimney 2.2 and chimney fixing bracket 21 with 2 screws 12 .

Wrong
B
EN-6
ɸ150
ɸ120