Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Finally, the app asks for the G Control Hub USB name. This name may be different than the Home name, and
will only be used in case you link more than one G Control Hub devices to the same Home. The last step is
the automatic registering of the unit, this process may take several seconds. When it reaches 100% the
installation is finished.
The last step is to set your current electricity tariff. You can select the preset off-peak tariffs available or
modify it if your tariff is different to the default ones. This modification can be made at any time once
registered your home.
The G Control Hub USB installation is over.
3.3 G Control PM association.
The last step to finish the installation of the SOLAR BOX is the link and association of the G Control PM
power meters previously installed (Generation and Home Consumption meters) to the app. Follow the next
steps to associate the meters:
-
Open the app and enter the Heating menu at the bottom of the screen.
-
Press the "Add" button and select the type of device that you are going to install (Meter).
13
EN
Publicidad
Tabla de contenido
