HoMedics spaREFLECTIVES M-8090 Manual De Instrucciones página 3

Illuminated Beauty Mirror Features
• Illumi-Touch™ Control – Select from 3 light settings with
a gentle touch of the mirror stem
• Variable Light Setting – Choose from day, office or
evening illumination
• Incandescent Light – Soft glare-free &
shadow-free viewing
• 7x/1x Magnification – Two-sided mirror with normal
and 7x magnification
• 8.5" Diameter
• Stable, non-slip base
• Fog free
• Mirror Measures 10.5"L x 8"W x 16.25"H
• Polished chrome finish
• AM/FM radio with blue back lit LCD clock
• Convenient built-in outlet
• Includes three replacement light bulbs
Instructions for Use
1. Carefully remove all contents from the packaging and
inspect the product to make sure all components have
been received (Fig. 1).
2. Remove protective plastic coating from mirror face.
3. Plug adaptor into AC adaptor receptacle (Fig. 2).
4. Place mirror on an even surface.
5. Adjust the mirror to either normal or magnified viewing.
To do so, swivel the mirror to the viewing side of your
preference while firmly holding down the base.
4
6. Plug unit into a 120V household outlet.
7. Select the light setting of your preference with the
Illumi-Touch control feature. Touch the stem of the mirror
to activate:
•Touch once for evening (Low)
•Touch a second time for office (Medium)
•Touch a third time for day (High)
•Touch a fourth time to turn off
Note: The mirror casing may be hot after prolonged use.
Be cautious when adjusting the mirror face.
8. To use the extra outlet in the adaptor, plug in the
appliance of your choice.
Note: NEVER leave a plugged in appliance unattended.
DO NOT exceed 12 amps on the receptacle.
Setting and Using The Clock:
1. Remove the battery cover (Fig. 2) and insert 1 "AAA" battery.
Note: The battery power is designed only to provide
memory back-up for the clock in the event of power
outages or if the unit is unplugged.
2. Press TIME MODE button (Fig. 2) once. The hour number
will flash continuously.
3. Continuously press the SET button (Fig. 2) until you
reach the correct hour.
Note: A PM indicator will appear in the lower section of the
clock face during the PM hours. Be sure to set the
time for the correct 12-hour period - AM (morning)
or PM (evening) (Fig. 3).
4. Press TIME MODE button again and the minute numbers
will begin to flash continuously.
5. Continuously press the SET button until you reach the
5