Plastimo SX-350 Manual De Instrucciones página 11

■ Main Function Operation
Select Channel Group
◆
·
This radio contains USA, International and Canadian Channel Group.
·
In standby mode, press [MENU] key, then press [LOCK] key to switch Channel Group.
Select Weather Channel
◆
This radio has 10 weather channels.
·
In standby mode, press [MENU] key, then press [VOL/SQL] key to switch between operating
channel and weather channel.
Edit CALL Channel
◆
1. Hold [C/16] key for 1 second to select CALL Channel, "CALL" and CALL channel number
are displayed.
2. Then hold [C/16] key for 3 seconds until two "DUDU" sound are heard to enter CALL
Channel programming mode, channel number flashes.
3. Press [▲]/[▼] key to select desired CALL Channel.
4. Press [C/16] key to confirm and save CALL Channel.
◆ Set/Cancel TAG Channels
Set TAG (★) for channels need to be scanned, cancel TAG (★) for channels which are no
need. The untagged channels will be skipped during the scanning.
·Set/Cancel Single TAG Channels: Hold [MENU] key for 1 second to set/cancel the
current channel as TAG channel, "★" displayed for channels which are tagged.
·Set/Cancel All TAG Channels: While Power OFF, hold [LOCK] key and press [
power ON, all TAG channels will be canceled in the selected channel group. Repeat the
above operations to set all channels as TAG channels.
◆ Scan Operation
Set scan resume timer in the menu mode.
1. Enter " " menu item to select Scan, exit menu mode to start Normal Scan or Priority
Scan.
·
"SCAN" flashes on LCD.
·
"16" appears on the sub channel readout during priority scan.
·
The scan pauses when a signal is received (The resume time can be set in the set mode).
·
Channel 16 is monitored in priority scan.
·
Press [▲] or [▼] to change the scan direction.
2. Press [MENU] key again, or press [PTT]/ [C/16]/ [
Watch Operation
◆
This radio contains Dual/Tri Watch, can be selected in the menu mode.
Dual watch: Watch and monitor in turns between the current channel and Channel 16.
Tri watch: Watch and monitor in turns among the current channel, Channel 16 and CALL
Channel.
1. Enter " " menu item to select Watch, exit menu mode to start Dual Watch or Tri Watch.
·
"DUAL" flashes during Dual Watch; "TRI" flashes during Tri watch.
·
A "BEEP" sound emits when signal is received on Channel 16.
·
Tri Watch switches to Dual Watch when signal received on CALL Channel.
2. Press [MENU] key, or press [PTT]/ [C/16]/ [
] key to
Vibration Water Draining Function
◆
The Vibration Water Draining Function helps to drain the water away from the loudspeaker
housing, which can prevent water ingress to affect the loudspeaker voice quality.
·
When standby, press [MENU] key, then press [
·
A deep sound emits for 10 seconds to drain water. Any key operation is invalid when vibration
water draining.
] to stop scanning.
] to stop watch and motoring.
] key to activate this function.
9