Miele STB 201 Instrucciones De Manejo página 11

Maintenance

Always disconnect the vacuum
cleaner from the electrical supply for
cleaning and maintenance work on
the Turbobrush. Switch off at the wall
socket and remove the plug.
Removing threads and hairs
(dia. 04 - 06)
 Cut any threads or hairs that have be-
come entangled on the roller brush
with a pair of scissors (dia. 04).
Then run the vacuum cleaner to va-
cuum up the bits.
For more obstinate tangles or block-
ages inside the Turbobrush, the cover
can be opened. Any large particles can
then be easily removed.
 Using a coin undo the roller cover on
both sides and then remove the cover
(dia. 05).
 Remove any dirt in the brush com-
partment interior and from the roller
brush.
 Replace the cover and secure it (dia.
06).
en
11