Intended Use; Safety Informations - BGS technic 70037 Manual De Instrucciones

TOOLS
1 Compressor tool
2 Spring holder
to be used as OEM:
119571, 119572, 119570
0197-3B1, 0197-3B2

INTENDED USE

This tool is used for removing and installing the return springs on the intermediate lever.
The included tools are suitable for following models:
Citroën Berlingo, C3 II, C3 Picasso, C4 I, C4 II, C4 Picasso, C5 III, DS3, DS4, DS5.
MINI: Clubman (R55), Countryman (R60), MINI (R56/R57/R58/R59), Paceman (R61).
Peugeot: 207, 208, 2008, 308, 3008, 408, 508, 5008, RCZ, Partner, Tepee.
Engine code: N12, N16, N18, 5FE, 5FN, 5FP, 5FV, 5FW, EP6
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

Do not use the tool if parts are missing or damaged.
•
• Use the tool for the intended purpose only.
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
•
caught by rotating parts and cause serious injury.
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
• Be careful when working on hot engines because of the risk of burn injuries.
If you remove the ignition key before repairing, you can prevent the engine from being started
•
accidentally and resulting in engine damage.
• This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
• Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Valve Spring Compressor
for BMW, MINI, Citroën, Peugeot
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
2
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70037
1