Intended Use; Safety Instructions - BGS technic 62614 Manual Del Usuario

Engine Timing Tool Set for BMW N40 / N45

INTENDED USE

This engine timing tool set is made for controlling and setting the engine timing during replacing the
timing chain, repairing cylinder head or replacing the cylinder head gasket on BMW engines N40, N45
und N45T (B16) with timing chain.

SAFETY INSTRUCTIONS

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 62614
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed