Volume Mode - essentiel b EBCB1 Manual De Utilización

Weight mode
1. Place the scale on a flat and stable surface.
2. Place the bowl (if used) on the scale.
3. Press the button to turn on the scale.
4. Wait until the display shows "0". Press the
5. Place the ingredient to be weighed on the scale (or in the bowl) to begin weighing. The
display shows the weight of the ingredient.
6. For water or milk, press the
is displayed on the screen.
16
V.1.0
use
Place the ingredient
on the scale
button to switch to "weight" mode.
button to switch to volume mode. The liquid volume

Volume mode

1. Place the scale on a flat and stable surface.
2. Press the button to turn on the scale.
3. Wait until the display shows "0". Press the
button to choose the required mode ("water volume"
or "milk volume").
4. Place a container on the scale platform. The display
shows the weight of the container.
5. Press the button to reset the scale to zero.
6. Pour the liquid into the container. The display shows the
volume of the liquid.
7. Press the button to switch to "weight" mode.
The weight of the liquid appears on the screen.
Reset-to-zero or tare function
This function is used to reset the scale to zero and
measure the weight of each ingredient separately, even if
you place them in the same container on the scale. Place
an ingredient on the scale, its weight is displayed. Press
the button to reset the weight back to "0" before
adding the next ingredient. If the screen displays "-----",
wait for the system to stabilise. After a few seconds, "0"
appears on the screen. You can repeat this step as many
times as you want.
When you press the button below 200 g, the
symbol (reset) is displayed.
When you press the button above 200 g, the
symbol (tare) is displayed.
Place the
container on
the scale
Pour the
liquid into
the container
17
V.1.0
use