Device Overview; Setup And Operation - oneConcept 10030166 Guia De Inicio Rapido

1 Funnel cover
2 Funnel insert
3 Funnel
4 Adjusting ring
5 Blade holder
6 On / off switch
7 Housing
8 Holder
9 Motor base
10 Motor
11 Under cover
12 Rubber foot
13 Cover
14 Flap
15 Mill
16 Nut
17 Fork star
18 Fork star
19 Fork star
20 Base
21 Doser
22 Dosing lever
23 Under cover
24 Sealing ring
1. Press the lock key on the adjusting ring (4) and turn the ring to adjust the desired degree
of grinding, then release again. IMPORTANT: Perform this setting with the motor off and
without coffee beans in the device.
2. Place coffee beans in the funnel (3).
3. Put on the funnel lid (1).
4. Press the on / off switch (6) to begin grinding. The automatic function stops the milling
process once the doser holder is filled.
5. Turn the device off after use.
Note: Turn the adjusting ring clockwise to grind the beans finer. Turn the adjusting ring coun-
terclockwise (4) to grind coarser. To increase the dosage amount per lever pull (22), turn the
nut (16) counterclockwise.
6

Device Overview

Setup and Operation