Cleaning And Care; Troubleshooting; Disposal Considerations; Hints On Disposal - oneConcept 10030166 Guia De Inicio Rapido

• Reinigen Sie die Mühle regelmäßig mit einem Pinsel.
• Reinigen Sie das Mahlwerk regelmäßig mit einem im Handel erhältlichen Mühlenreiniger.
• Der Dosierbehälter lässt sich auseinandernehmen, indem Sie die Mutter oberhalb der
Gabelsterne abschrauben.
Problem Possible Cause
The motor Check whether the
does not run. overload protection
is defective.
The grind Verify that all
setting parts are correctly
fineness is not installed.
exact.
Verify that the
adjusting screw
(4) is correctly
installed.

Cleaning and Care

Troubleshooting

Hints on Disposal

According to the European waste regulation 2002/96/EG this symbol
on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be taken to the ap-
propriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate was-
te handling of this product. For more detailled information about recyc-
ling of this product, please contact your local council or your household
waste disposial service.
Solution
Replace the on / off switch.
Turn off the device. Clean the equipment and
check is whether the anything is blocking
the motor. Put all of the parts back together
properly and start the device again.
Put all of the parts back together properly and
start the device again.
Turn off the device and remove the beans. Set
the adjusting ring in place again, fill coffee
beans and start the device again.
7