Hometec Pro App - Abus HomeTec Pro CFA3100 Manual De Instrucciones

5.

HomeTec Pro App

• Download the ABUS HomeTec Pro app and enable Bluetooth® on your
smartphone.
• Start the app and follow the instructions in the app.
• As an alternative to a smartphone, the door lock power unit can also be
operated with other HomeTec Pro components.
• Pay attention to the assignment of the different keycards to the products,
and always scan the correct keycard.
• To program a component (e.g. CFF3100 remote control), start by pressing
the button "Add HomeTec Pro/component".
• Always keep ABUS keycard(s) in a secure place even after the teaching
process! You need the keycard for software updates, if you lose your
smartphone, and for proof of ownership for matters related to warranty
claims and repair. Do not give the card to third parties.
To guarantee proper function, we expressly recommend performing
updates in the app and software/firmware updates for HomeTec Pro
components in a timely manner. The app will provide information on this.
You can also perform the respective update in the component's settings.
5.1
Operating keys and LED displays for the drive
Navigation
Unlock /
Exit
28
HomeTec Pro
Lock /
Confirm
LED
shining flashing flashing
rapidly
Optional: Program the drive on the door in
5.2
its factory default state or after a factory reset
(programming is intended to be done in the
ABUS HomeTec Pro app)
press 3 sec.
open
aprox. 3 sec. - 10 sec.
turns automatically
(Route learning cycle)
turns automatically
(Torque learning cycle)
5.2 a
Rapidly flashing LEDs and rapid beep
indicate a fault to be rectified
check!
Adjustment of the door
or cylinder.
+
close
5.2 a
press
=
5.2
press
29