Product Description And Specifications - Bosch GKF 12V-8 Professional Manual Original

14 | English
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for milling edges and profiles in
wood, plastic and non-metallic lightweight materials while
resting firmly on the workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
A)
(1) Battery
A)
(2) Battery release button
(3) Temperature monitoring/overload protection indic-
ator
(4) Battery charge indicator
(5) On/off switch
(6) Marking arrow for spindle lock
(7) Spindle locking lever
(8) Routing depth coarse adjustment button
(9) Cap nut with collet
(10) Thumbwheel for fine adjustment of routing depth
(11) Routing depth adjuster fixing screw
(12) Base plate
(13) Handle
(14) Routing depth adjuster locking wheel
(15) Collet
(16) Tool holder
A)
(17) Router bit
1 609 92A 57U | (04.03.2020)
(18) Open-ended spanner (17 mm)
(19) Smooth guide column
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Edge router
Article number
Rated voltage
No-load speed
Compatible collets
Router cage stroke
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
B)
during operation and during
storage
Recommended rechargeable
batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑17.
Typically, the A-weighted sound pressure level of the power
tool is 71 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection !
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑17: a
2
K=1.5 m/s .
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
GKF 12V-8
3 601 FB0 0..
V= 12
–1
min 13000
mm 6/8
inches ¼
mm 36
A)
kg 1.3–1.5
°C 0 to +35
°C –20 to +50
GBA 12V...
GAL 12...
GAX 18...
2
<2.5 m/s ,
h
Bosch Power Tools