Better Homes and Gardens Canton Manual Del Usuario página 21

18. Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are tight and there are no
gaps between the parts. This will help keep the unit square.
19. Flip the assembled unit around at its front edges. Unfold the Back Panel (M) and position it onto the back
edges of the assembly. Make sure that the overlaps on the panels are even all the way around. Secure the
Back Panel (M) in place with the 15 mm Washer Head Screws (8).
NOTE: We recommend attaching back panel with the screws at the corners first.
Assembly Instructions
C
⑧ x 24
M
G
21
8
8