Main Menu And Navigation - BYK byko-spectra pro Instrucciones

byko-spectra pro

4 Main Menu and Navigation

To turn on the unit, press the power switch I/O on the left side, below
the display.
Navigation
Main menu
1 Illuminants
2 Lighting conditions
3 Lux adjustment
4 AUTO
5 SETUP
8
3
2
Move with ▲ and ▼ to desired illuminant. Press ENTER to
switch on or switch off. Move with ◄ and ► to scroll through
lighting conditions.
DL = D65 daylight
CWF, TL84, U30 = Department store light
A = Incandescent light
HZ = Horizon (2300 K)
UV = Ultra-violet light
Type = Illuminant type
RHours = Remaining lamp life in hours
RCycles = Remaining switching cycles
Tcp = Color temperature in K
Ev = Illuminance in Lux
Dimm CWF, TL84, U30 or UV with ◄ and ►.
Select with ENTER to run auto sequence mode. Press and hold
ENTER to set-up auto sequence mode.
Check and adjust device settings (Operator, Profile, Lamp re-
placement, Chain, Reset ... ).
1
4
5
BYK-Gardner GmbH
301 300 039 - 2007