WEEKLY TIMER SETTING
Indicates the selected day
Lights up if Timer operation is selected
6 different programs can be set in a day (1 ~ 6)
TIMER
1
2 3 4 5 6
MONTUEWEDTHU FRI SAT SUN
ON
OFF
SOLAR REMOTE
Water temperature thermo shift (-5ºC ~ 5ºC)
OFF Timer - To automatically switch "OFF" the unit
ON Timer - To automatically switch "ON" the unit
Day to be selected
Function
Step
Enter timer mode
Press
Set day & time
1. Press
2. Press
3. "1" will be blinking, press
4. Press
5. Press
You can set
6. Press
• After 2 seconds, the display will move to the next program.
7. Repeat steps 4 to 7 to set programs 2 to 6.
• During timer setup, if no button is pressed within 30 seconds, or if the
setting at that moment is confi rmed and timer setup is ended.
Repeat the steps above.
Add/Modify timer
Disable timer
Press
Enable timer
Press
Check timer
1. Press
2. Press
3. Press
Cancel timer
1. Press
2. Press
3. Press
4. Press
5. Press
Notes:
• You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.
• When the unit is switched on by the ON TIMER, it will use the previously set temperature to control the water outlet
temperature.
• Same timer program cannot be set in the same day.
• You may also select collective days with same timer setting.
• Promotes energy saving by allowing you to set up to 6 programs in any given day.
All manuals and user guides at all-guides.com
C
TIMER
.
or
to select your desired day.
SELECT
to confi rm.
SELECT
to set program 1.
OFF/ON
to select ON or OFF timer.
or
to select your desired time.
QUIET
HEATER
MODE
,
,
and desired shift temperature
SET
to confi rm program 1. The selected day will be highlighted with ▼.
CANCEL
TIMER
, then press
.
SET
TIMER
, then press
.
TIMER
.
or
until your desired day is shown, press
or
to check the set programs.
TIMER
.
or
until your desired day is shown, press
SELECT
to enter program setting.
or
until your desired program is shown.
CANCEL
to cancel the program.
SETTING
SET
MODE
TIMER
SELECT
OFF/ON
QUIET
HEATER
CANCEL
CLOCK
with timer.
SET
SELECT
to confi rm your selection.
SELECT
to confi rm your selection.
STATUS
button is pressed the
7