7.5 Discharging the pipet
Hold the collecting vessel at an angle. Place
the pipet tip against the inner wall of the
vessel, push down the pipetting lever (4) to
dispense the liquid.
Free discharge for pipets with waiting
time (Imprint e.g."Ex+ 15 s")
– As soon as the meniscus stops moving,
start the necessary waiting time
(e.g. 15 sec).
– Wipe the pipet tip along the wall of the
vessel by sliding upwards a few millime-
ters.
Blow-out pipettes
(Imprint "ausblasen – blow out"):
– As soon as the meniscus in the pipette
tip comes to a standstill, press the blow-
out bellows (2) once.
– Wipe the pipette tip a few millimeters
upward along the wall of the vessel.
7.6 After pipetting
To remove the pipet, gently grasp near the
top and carefully remove with a twisting
motion.
25