Ideal Networks PoE Pro Guía De Uso página 7

PoE TESTING
To test PoE:
• Turn on the PoE PRO tester
• Connect the RJ45 port of the tester to the PoE port or cable to be tested.
• Press the Network button
PoE Detected
Unloaded
Voltage
(Voltage detected
when drawing
no power)
Above screen is displayed when PoE is detected without an ethernet signal (PoE Injector with
Ethernet
Speed
If ethernet is detected, the maximum detected link speed will be shown with the no-load PoE
158823.01
input from a switch). It will be shown for two seconds.
Max
voltage for two seconds.
PoE PRO
EN
7