Página 2
Important safety WARNING! precautions... Use extreme caution when installing Many do-it-yourself and professional antenna installers are injured or killed each year by electric or removing an outdoor antenna shock. While anyone can see the obvious danger of that is located close to overhead wires falling, the most resourceful sometimes fail to recog- such as power lines, telephone lines nize overhead wires as being potentially lethal.
Always plug your TV and other electronic devices into a quality surge protector for maximum protection The TV44 is the perfect complement to any multi- against lightning and power surges. beam satellite dish system. It picks up VHF and UHF signals so that you can enjoy local programming, at •...
A. Install the TV44 antenna on your satellite dish B. Install the inside diplexers C. Set up your television set(s) to use the TV44 Please be sure to complete all of these steps before attempting to watch local channels with your TV44.
20 afuera (vea la Fig 5 en la pagina 9). pulg o mas grande. Aprete las clips al TV44 y empuje- las abajo hacia la abrazadera de montaje (vea la Fig 5 Desplace las abrazaderas a lo largo o alrededor en la pagina 9).
Página 6
Fig 18 múltiple. Conecte los cables de conexión satelital a los terminales “OUT” 1-4 en su TV44 (vea la Fig 17 en la pagina 11). Usando los cables negro de 32pulg (80cm), conecte el “IN” de los terminales 1-4 del TV44 al “Output”...
“TV OUT” del receptor satelital y su televisor o VCR (vea la Fig 13 en la pagina 13). 6. Repita para cada receptor satelital. Fig 13 7. Continue con las instrucciones del “Paso C: Programando su televisor para usar el TV44” (Pagina 14).
TERK shall not be liable for any incidental or conse- Tighten the clips so that the antenna is firmly quential damages for breach of any expressed or secured to the satellite dish in that position.