USRobotics 5637 Guía Breve De Instalación página 9

6. The PWR LED on the modem will light.
Congratulations. You have successfully completed the installation pro-
cedure. Please register your 56K USB Modem at
ductreg/.
Windows 2000:
You must be logged in as an administrator in order to install this modem.
1. When the Found New Hardware Wizard appears, click Next.
2. Insert the USRobotics Installation CD-ROM into your
CD-ROM drive.
3. Select Search for a suitable driver for my device
(recommended) and click Next.
4. Select only CD-ROM drives and click Next.
5. When Windows locates the driver for the modem, click Next.
6. If a Digital Signature Not Found window appears, click Yes.†
7. Click Finish to complete the installation.
8. The PWR LED on the modem will light.
Congratulations. You have successfully completed the installation pro-
cedure. Please register your 56K USB Modem at
ductreg/.
Linux Kernel 2.4.20 or Higher
You need a USB modem driver (CDC ACM) compiled into a Linux ker-
nel 2.4.20 or higher or as a loadable module for your kernel. Installation
of the modem under these kernels is fully automatic provided your kernel
† USRobotics has thoroughly tested this driver in conjunction with the supported hardware
and has verified compatibility with Windows Vista, XP, and 2000.
www.usr.com/pro-
www.usr.com/pro-
English
5