Flashing Light - IKEA 0 942 70 Manual De Instrucciones

Strictly comply with instructions for installation and use.
Receiver description
1
A. Speaker
B. Melody selection (30 melodies available + MP3)
C. Volume control
D. Additional transmitter pairing
E. Light indicator setting
F. Micro USB socket
G. Indicator light (led)
Transmitter description
2
A. Name Plate
B. Weatherproof button
C. Light indicator
Transmitter / receiver pairing
3
Additional transmitters pairing: 4 maximum for 1 receiver (See procedure drawing 3)
Receiver installation: wall mounted/ free-standing
4
Transmitter installation: with screws / adhesive / free-standing
5
Changing Receiver / Transmitter Batteries
6
Do not use rechargeable batteries
Technical characteristics
7
Radio operating range: 200 m free field
Receiver sound power: 80 dB
Receiver power supply: 3 x 1.5 V AA batteries (not included)
Transmitter power supply: 1 x 3 V battery (CR2032) included
Frequency band: 433.05-434.79 MHz
RF power level: < 10 mW
Degree of protection of doorbell: IP 54 - of the receiver: IP 20

Flashing light

8
Flashing
Slow
Fast
Alternate
MP3
9
1 - Install the software on a computer using the USB cable
Supplied, from the internal memory of the chime
9
2 - Click on the icon to launch the software
3 -
4 - Click + to import an MP3 melody in the selection window
5 - Select the melody and press play (mandatory 1 time)
6 - Set the duration of your melody by selecting the beginning and the end and click ✂
Mode
7 - The software asks you to confirm where to save the new MP3 file: receiver memory
someone rings 8 - To set the MP3 melody, select it with the B button
Low receiver battery
The undersigned, LEGRAND, declares that radio equipment of the type (0 942 70 - 0 942 71)
complies with Directive 2014/53 / EU.
The full text of the EU declaration of conformity can be found at:
www.legrandoc.com
5
MP3 (continued)