Casals VLIXS36 Manual Del Usuario página 6

Fitting and removing screwdriving bits using the bit
holder extension (Figs. 3 and 4)
- Fit the bit holder extension (9) into the bit holder (1)
and press until it holds firmly.
- Fit the screwdriving bit (10) into the the bit holder
extension (9) and press until it holds firmly.
- To remove the screwdriving bits (10) pull it out of
the bit holder extension (9).
- To remove the bit holder extension (9) pull it out of
the bit holder (1).
How to select the direction of the rotation (Fig 1)
- Do not change the direction of the rotation whilst
the tool motor is in operation.
- Press the top part of the on/off switch (2) to rotate
the bit in a clockwise direction
- Press the bottom part of the on/off switch (2) to
rotate the bit in anticlockwise direction.
Use:
- Turn the appliance on, by using the on/off switch
(2).
- Press the top part of the switch (2) to rotate the bit
in a clockwise direction
- Press the bottom part of the switch (2) to rotate the
bit in anticlockwise direction.
Once you have finished using the appliance:
- Stop the appliance by releasing the on/off switch. (2)
Cleaning
- Allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of the
appliance.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and inexorably
affect the duration of the appliance's useful life and
could become unsafe to use.
Supplies
- Always use original supplies, designed specifically
for your appliance model.
- These supplies are available in specialist shops.
Anomalies and repair
- Take the appliance to an authorised technical
support service if a product damage or other
problems arise. Do not try to dismantle or repair
without assistance, as this may be dangerous.
- If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage.
Specifications:
- Rated Voltage (V):
- Battery capacity (A·h):
- No load speed (rpm):
- Ø max screw (mm):
- Reversible
- Charging time (hours):
- Weight (Kg:)
- Acoustic pressure level (dB(A))
- Vibration (m/s2)
- Not suitable for use in presence of flammable anaesthetic
mixture with air or with Oxygen or nitrous oxide
NB: These specifications are subject to change
without notice of purpose of improvement.
For EU product versions and/or in case that it is
requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate public
recycling bins for each type of material.
- Respect the environment and do not throw used
batte
Autho
throw
- At t
throw
Appli
batte
conta
- The
subst
envir
- Th
oil.
regul
of con
VLIXS36
3.6
1.0
180
6
yes
5
0.33
< 80
< 12