Filling The Device - The Fountainhead Group 184703 Manual De Uso Y Cuidado

Filling the Device

CAUTION: RISK OF DAMAGE TO INTERNAL COMPONENTS. Use of chemicals other than water may
damage the Device and will void the warranty.
WARNING: RISK OF DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE FROM IMPROPER CHEMI-
CAL USE OR MIXTURE. Never use flammable or combustible liquids, caustics, acids, or hot water in this
Device. Dispensing flammable or combustible liquids can create combustible fumes that could be ig-
nited by the electrical system in the Device, causing an explosion. Always wear appropriate personal
protection equipment as instructed by manufacturer when using, preparing, handling, or dispensing.
This includes at least goggles, gloves, and protective clothing.
1. Ensure that the Pump is turned OFF (Light is OFF).
2. Pull up on the knob of the Pressure Release
Valve until all the pressure is released from the
Tank (See Figure G).
3. Turn the Pump Handle counterclockwise to remove the Pump (See Figure H).
4. Fill the Tank to the desired level. See fill markings on side of Tank.
5. Install the Pump into the Tank opening and turn clockwise until tightly sealed against the Tank
(See Figure I).
OPERATING INSTRUCTIONS
Figure H
Figure G
Figure I
Page 4