Pleasant Hearth GABLE Manual Del Usuario página 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 25 minutes
Tools Required for Assembly: Wrench (included) and Phillips Screwdriver (Not Included)
ASSEMBLY INSTRUCTIONS
1. Lay the decorative ring (D) upside down on
the floor with the mounting holes facing up.
Attach the fire bowl (G) to the decorative ring
(D) using four M6x10mm bolts (AA)
as illustrated. Tighten with a screwdriver.
Hardware Used
AA
M6x10mm Bolt
1
AA
G
x 4
D
4